TOCS(Tohatsu onboard communication system) is a communication network that integrates the electrical devices within the boat and all devices are compatible with NMEA2000®.
The TOCS gauges are only applicable for models listed below and restriction on the serial no. applies as below.
MFS25/ 30D
Applicable for all serial no.
MFS40/ 50A
Applicable for serial no. 013179AE and above
MFS60A
Applicable for all serial no.
MFS75/ 90/ 100/ 115/ 140A
Applicable for all serial no.
BFT Model
Applicable for all serial no.
MFS25/ 30C
Applicable for all serial no.067991AD and above (MFS25/ 30C also requires INTERFACE CABLE(3NV-76133-0) for connection between ECU and engine drop cable.
MD30/ 40/ 50B2
Applicable for serial no. 004743AE and above
MD75/ 90C2
Applicable for serial no. 011819AE and above
MD115A2
Applicable for serial no. 011828AE and above
TOCS 4.3 inch LCD Display
The optional TOCS (Tohatsu Onboard Communication System) 4.3 inch LCD Display connects to the CAN bus and communicates directly with the engine's ECU. Engine data, fault codes, and alarms are displayed on the LCD display, and performs with perfect visibility even under the direct sunlight. It is fully compatible with Tohatsu outboards MFS25C to MFS115A and BFT models including self-diagnosis function.
Part Number
Description
Applicable Models and Remarks
3ZG-72630-0
TOCS 4.3’’ LCD DISPLAY KIT
For USA, CANADA, EU+EEA, AUSTRALIA AND NEW ZEALAND ONLY
Multi-Function Tachometer
The TOCS Digital Tachometer features large lighted buttons, chrome bezel, fog and scratch resistant coating , plug & play connectors and is LED back-lit for easy viewing at night/dusk. A user-friendly, intuitive design makes the menu easy to navigate. The TOCS multi-function tachometer connects to the CAN bus and communicates directly with the engine’s ECU. Engine data, fault codes and alarms are displayed on the LCD display (TLDI & MFS models only) and are visible even in direct sunlight. Fits a standard 85mm (3.375 inch) instrument dash hole which makes this tachometer the perfect drop-in replacement for your current tachometer. In addition to showing the outboard’s RPM’s the gauge also features:Tilt/Trim Gauge (optional harness needed for MFS/TLDI models, part number 3KY-72573-0)
Engine Operating Temperature
Engine Overheat Warning
Engine Battery Voltage
Low Battery Voltage Warning
Over Rev. Warning
Engine Safety Governor Mode Warning
Fuel Flow Rate (Gallons Per Hour)
Multiple Fuel Tank Levels
Total Engine Hours
Lanyard Not Installed Warning (not available on TLDI)
Oil Change/Scheduled Maintenance Notice (not available on TLDI)
Charging System Indicator Warning (BFT models only)
Water-In-Fuel Warning (BFT models only)
Part Number
Description
3KY-72638-0
Tachometer kit (includes Harness and operation manual)
Speedometer
Part Number
Description
3KY-72672-0
Speedometer kit (includes Harness for SPEED)
Trim Meter
Part Number
Description
3KY-72523-0
Trim Meter kit (includes Harness with 4 pins)
Fuel Meter
Part Number
Description
3KY-72600-0
Fuel Meter kit (includes Harness with 4 pins)
Volt Meter
Part Number
Description
3KY-72600-0
Volt Meter kit (includes Harness with 4 pins)
TOCS Starter Kit
Basic starter kit includes Engine drop cable, Battery cable, Terminator(Female and Male), Tee Connector and Tachometer and operation manual. In case other gauges are needed, you can just plug in the additional gauge to display.
No.
Part Number
Description
①
3KY-76131-0
Engine Drop Cable
②
3KY-76120-0
Battery Cable
③
3KY-76152-0
Terminator (female)
④
3KY-76153-0
Terminator (male)
⑤
3KY-76151-0
Tee Connector
⑥
3KY-72638-0
Tachometer kit (includes Harness and operation manual)
